Modern underfloor heating systems create comfort in any space: from the bedroom to the kitchen. But if you are planning to install parquet, it is important to understand that not every tree and not every type of coating is suitable for such conditions. In this article, we'll tell you how to properly combine natural parquet and a heating system to ensure that the floor remains stable, beautiful, and durable.
Is it possible to lay parquet on a warm floor?
Yes, if all technological requirements are met.
Parquet is a natural material that reacts to changes in temperature and humidity. If the floor heats up unevenly or exceeds the permissible temperature, the wood can warp, crack, or lose color. That's why it's important to choose a stable board design and follow the operating conditions.
Which type of parquet is best suited
- An engineered board is the best option for underfloor heating.
It has a cross-layer structure (plywood), which reduces the risk of deformation when heated. - Three-layer parquet board is also stable, has similar properties, but is more susceptible to deformation during seasonal fluctuations in temperature and humidity.
- Solid wood is less recommended. Due to the homogeneity of the material, it reacts more strongly to changes in temperature and humidity.
Optimal temperature and humidity
- The floor surface temperature is no more than 27°C.
- The air humidity is 45-60% (humidifiers are a must-have in winter).
- The temperature of the wood should rise gradually: the underfloor heating is launched in stages, adding a few degrees every day.
Types of heating systems
- Water underfloor heating is the best option for wood, as it warms the surface evenly.
- Electric (cable or film) is acceptable if the system is of high quality and has accurate temperature control.
The prerequisites are uniform laying and proper operation of temperature sensors.
Installing parquet on underfloor heating
- Floating or adhesive mounting with a heat-compatible elastic adhesive is used.
- Before laying, it is important to check that the moisture content of the screed does not exceed 1.8%.
- The parquet should be acclimatized in the room for at least 48 hours before installation.
Which coating to choose
For a floor heating system, it is better to choose oil-wax or parquet varnish coatings.
They are more elastic and do not crack under temperature changes.
Conclusion.
Parquet and underfloor heating go well together - provided you choose and install them correctly.
The main thing is not to skimp on the quality of materials and to follow the technology.
Then your EVEROLI parquet will give warmth, comfort and beauty for decades.
